Design Tips

Design Tips

• Fabrics & Color variations

  Color variations from an identical image file should be expected to some degree across various fabrics.

  Each fabric base has a different base tone and varies in color, light reflectivity, thickness, weight, opacity and weave. They may all have an impact on the print color as well as the appearance of the print color.

  Also various lighting conditions makes printed fabrics color seemingly vary.

  We do endeavor to ensure all of our printers are calibrated for each and every fabric, however the above must be taken into consideration when ordering the same graphic or colors across various types of fabrics and ink sets. Choosing similar weaves and weights can help to ensure your colors look as brilliant as desired.

  Please note as well that every once in a while, our printing team tweaks printer calibrations to refine colors. They are constantly on the lookout for new and improved ways to print, strengthening print processes and improving color precision wherever possible. We might also upgrade our machinery to optimize printing outputs. These can result in some color variations between two identical orders on the same fabric. These will be minimal however still slightly visible. In case some color variations may impact your work and you wish to re-order after a certain time, we do advise to order new fabric samples shortly before your larger print run. This will ensure you receive prints with a the closest color accuracy possible.

  Our inks are also water based. None of our fabrics or inks contain or use Azo dyestuffs. No contaminants of any kind enter the water course thanks to our eco-friendly print process. Read more about Sustainability here.

• Pantones & Color Profiles

  We advise providing images in the RGB color space. Specifically using the sRGB image profile, to achieve best color results. What does this mean? In your editing software, choose RGB as the working space and assign the image profile as sRGB (full name sRGB IEC61966-2.1)

  PANTONES actually refer to the “pantone textile color libraries”. The pantone “coated and uncoated” color mixes are for laser and lithographic printing and so not suitable for textile printing. Pantones should be created within a CMYK color space. We do try to closely match pantones, though due to the nature of our printing an exact match is not always possible. An exact pantone match is essential? Please contact us prior to ordering.

  MONITORS & PRINT

  Only specialist graphic monitors under strict lighting conditions can reproduce printed colors. An average laptop or PC screen will look good, but will not necessarily be accurate, not to mention that a lot of the colors are so bright that printers cannot reproduce them. For further information, search for “subtractive color vs additive color” to understand the limitations of colors on monitors and printed media.

  CONTINUITY OF COLOR

  Repeat orders? Keep your color space and profiles consistent.We advise providing images in the RGB color space. Specifically using the sRGB image profile, to achieve best color results. What does this mean? In your editing software, choose RGB as the working space and assign the image profile as sRGB (full name sRGB IEC61966-2.1)

  BLACK AND WHITE

  For best neutral black and white, uploading your file as a grayscale file.

  SPOT COLORS, UV

  Though we do not use spot colors or UV and true metallic or gold colors cannot be achieved, you can get very close results by selecting a fabric with a shine such as Duchess Satin (use our fabric filters to find the matching fabric) and use a pattern with a golden or metallic texture. You could also use the color codes e3c157 (gold) and d0d0d0 (metallic) however the result will be plainer than with a textured pattern. We do advise to start with a personalized fabric.

  You can only upload PNG, JPG and flattened TIFF files. If you upload unflattened tiffs this will cause unintended changes to your design not visible on the interface and which you need to ensure you

• Cutting, Hemming Options & Allowance

   Cutting of the fabrics:

  We have four finishing options for your fabric order:

  • As it comes. We cut around your image, leaving a simply scissor cut, perhaps uneven white fabric border.
  • Hem with thread. We can hem your fabric with a choice of black or white thread. See below for information on how this affects the size of your print.
  • Cut on the line. We will cut neatly on the edge of your image.

  Hemming Options & Fabric shrinkage

  At Contrado, we have our own in-house stitching department, and are able to hem your printed fabrics for a small extra fee (option to select on the design interface after clicking on "Start Design" and selecting the fabric dimensions.

  We can hem with either black or white thread. However, please be aware that hemming options will reduce the size of your finished piece: A 39.37" x 39.37" square of fabric will measure approximately 38.78" x 38.78" once hemmed. If you want to retain the original size, you’ll need to make your print larger to compensate. Average Shrinkage by fabric are:

  - Light Fabrics & Silks: a 0.23"- 0.31" (6-8mm) 2-fold hem. Minus 0.47"- 0.63" (12-16mm) per side.

  - Medium Fraying Fabrics: a 0.59"- 0.79" (15-20mm) 2-fold hem. Minus 1.38"- 1.57" (35-40mm) per side.

  - Stiff, Heavy, & Non-Fraying Fabrics: a 0.59"- 0.79" (15-20mm) 1-fold hem. Minus 1.38"- 1.57" (35-40mm) per side.

  Measurements are approximate, and can vary. Please take fabric printing shrinkage values (2-8%) into account in addition to hemming options.

• Preparing your artwork

  Our online preview will accurately advise whether your uploaded graphic is of sufficient quality to print at the physical size you have selected. If you see a low quality warning you have a few options to ensure your print is as sharp as possible. Some advice below:

  1. Reduce the size of your graphic and tile. You can reduce the size of your graphic until the LQ warning is removed, then use our variety of tiling options to fill your print area.
  2. Reduce the size of your graphic and add a complimentary background color. Again reduce your graphic size until the LQ warning goes away.
  3. Using software to upscale.

  WARNING this can adversely further reduce the quality of your graphic, and should only be used as a last resort. Recapturing the image at a higher resolution is best practice if possible. In any case do not just increase the resolution (dpi) of a file as it will only trick online systems to believe the new design would be of higher quality when it in fact would not have changed at all.

  Using the image size dialogue in Photoshop or other designer tool you can resample your image via Preserve Details (enlargement) or Bicubic Smoother (enlargement) > then increase the resolution or width/height.

  Resampling your image means that what was one pixel is enlarged into many more. This will increase the size of your graphic (in terms of file size, physical size and resolution) but will not necessarily increase the quality, straight lines and fine details can become fuzzy. Careful sharpening after enlarging can bring detail back into focus.

  Photoshop plugins such as “Real Fractals” can do a better job of enlarging, there are many more available for a small fee or free of charge.

  If your graphic is fairly simple (low details, low number of colors) you can import into Adobe Illustrator and use its image trace preview, playing around with the settings to get an accurate trace of your image.

  Always export your image at max quality, using formats such as flattened tiff or PSD when editing, and only saving to a jpeg when you are uploading your file for print.

• Design Errors & Failed Designs

  In order to maintain a high standard of quality, our design interface notifies you if your design is not quite right. Here's what you need to know.

  Waiting for Approval

  Our system is processing your design, then it will be published.

  Out of Stock

  The product is out of stock. Check back regularly or sign up for an email notification on the product page.

  Design Errors

  • Low quality images: you've uploaded an image that won't print with the best quality. To amend this, either shrink your image or upload a new image that is higher quality. Try creating a repeat pattern as well.
  • Very small images: you've uploaded an image that is too small to see clearly. To amend this, enlarge your image until it's acceptable quality or replace with a higher quality image.
  • White space detected: you haven't covered the entire surface of your product, so part of it is left white. To amend this, please enlarge the image or apply a repeat pattern to cover the full surface including the bleed area. If this was intentional, apply a white background color using the hex code: #ffffff
  • Text too close to edge: you've added text too close to the edge of the panel and it's overlapping with the bleed area (in red). To amend this, please move your text out of the bleed area and away from any edges to ensure it prints correctly.
  • Incomplete design: you've either left a panel of your product only partially designed, or didn't design a panel of your product. To amend this, please review all the panels of your product and ensure they're all covered. If you'd like to leave part of your design white, apply a background color using the hex code: #ffffff
  • Offensive words: you've included one or more offensive words in your design. To amend this, please remove the offensive word.
  • Brand words: you've entered the name of an established brand on your design. To amend this, please remove the brand's name. 

  Failed Design

  Our system was unable to process your design. Please try again and resubmit it.